Ergonomic Magnetic Clay Wire Cutter Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy-duty magnetic ergonomic handles for a pottery clay wire cutter. Optimized for strong ASA/ABS 3D prints.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Upgrade your pottery toolkit with this heavy-duty, ergonomic wire tool handle set designed specifically for ceramic artists and clay work. Featuring the "Fired In Hell" branding, this two-part handle system is built to withstand heavy wedging and slicing while providing a comfortable grip.
The design incorporates integrated slots for heat-set inserts to secure your stainless steel cutting wire, alongside pockets for strong neodymium magnets so your handles snap neatly together or stick to your wheel or studio surfaces when not in use.
Recommended Print Settings
Because slicing through dense clay puts significant stress on tool handles, a robust material and solid infill are highly recommended:
Material: ASA or ABS (for maximum strength, durability, and chemical/moisture resistance in the studio).
Infill: 100% (essential for preventing the tension of the wire or the resistance of the clay from snapping the inner prongs).
Perimeters: 2–4 for clean text rendering and solid walls around the hardware pockets.
Hardware Required (Bill of Materials)
Note: The quantities below are for a complete set of two handles.
Component | Specification | Quantity | Purpose |
Threaded Heat Inserts | M5 × 6mm × 7mm | 2 | Secured inside the handle prongs |
Screws | M5 × 8mm | 2 | Clamps the stainless steel wire in place |
Magnets | 8mm × 3mm Neodymium | 4 | Allows handles to snap together/stick to metal |
Wire | Stainless Steel Wire (~0.75mm thick) | ~12" | The cutting element |