1 / 5
Border Collie and Cat Looking Over Fence Silhouette — zdjęcie 1
1 / 5

Border Collie and Cat Looking Over Fence Silhouette

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A two-piece wall silhouette of a Border Collie and a cat looking over a fence.

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a silhouette of my recently passed Border Collie and her little brother and best buddy, a Tabby cat, designed for her memorial wall. It is a two-piece design to easily print on smaller beds, though you can scale it to whatever size you prefer.

 Design Features & Assembly

  • Easy Alignment: The fence section laps perfectly underneath the cat’s paw for seamless alignment and easy gluing.

  • Stand-Alone Version Included: I have also included a version of the cat with the fence sticking out on both sides if you prefer to print them as entirely separate pieces.

  • Finishing Tip: I printed mine in gray and then painted them as needed. I would have printed the dog in black, but I was out of black PLA at the time! For the background color underneath (other then the white), I used thin colored cardboard from food boxes and glued it to the back to make the details pop.

 

Dimensions

  • Dog Length: 8.68 inches (220.6 mm)

  • Dog Height: 6.15 inches (156.2 mm)

  • Cat Length: 4.84 inches (122.8 mm)

  • Cat Length (Separate): 5.5 inches (139.7 mm)

  • Cat Height: 4.22 inches (107.2 mm)

  • Thickness: 0.09 inches (2.3 mm)

 

Mounting Instructions

  • Option 1: Use a small amount of double-sided invisible mounting tape to stick it directly to the wall.

  • Option 2: Carefully drill a couple of very small holes through the design and use small brad nails to hang it.

Print Settings

  • Material: PLA

  • Layer Height: 0.20mm

  • Infill: 20%

Tagi