Slot machine inspired Decora light switch cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Decora-style light switch cover inspired by slot machines
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cover for Decora-style light switches, inspired by slot machines. No MMU or AMS needed (this was the trickiest part of the design, phew!).
Required Hardware:
8x Round magnets (6x2mm)
Round double-sided tape (usually 10mm diameter)
Superglue
Assembly Instructions:
Use superglue to attach the buttons, button rims, and coin slot to the case.
Use double-sided tape to attach the rod to the rocker.
Use superglue to stick the magnets to the magnet holders.
Attach round double-sided tape to the back of magnet holder #2 (See image).
Press the case against the original cover. Magnet holder #2 should stay on the original cover, leaving the case removable.
Attach the lever to the rod, then the knob to the lever.
All files are oriented for better printing results and strength. Add support as needed.
Update June 29: Modified the lever to provide a bit more tolerance. Widened the opening on the side of the case.
Check out my full collection of light switch covers here: https://www.printables.com/@ETZ_3D/collections/3557286
Keywords: decora, light switch cover, single switch, rocker switch, wall plate, slot machine, casino, arcade, retro, novelty, lever, home decor, magnetic, no mmu, no ams, snap fit, interactive