Starwars Film Titles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge of the Starwars film titles
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
**This print needs a 0.2mm nozzle**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
#000000 PLA Geeetech Black Transmission Distance: 0.1
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 1
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#ff7338 PLA Anycubic Vibrant Orange Transmission Distance: 3.7
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.1
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to BambuLab Green
At layer #8 (0.72mm) swap to Black
At layer #9 (0.8mm) swap to Maroon Red
At layer #12 (1.04mm) swap to Vibrant Orange
At layer #17 (1.44mm) swap to Yellow
At layer #20 (1.68mm) swap to Turquoise for the rest.