Festool Systainer 3 lid drill inlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to store my metal and wood drills in a way that I could easily reach them, so I made this.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
After making the organisers for the small systainers, I also wanted to organise my drill bits in normal-sized systainer lids. Since no one else made an inlay that looked clean enough, I made this one myself. I hope you like it!
The inlay is a press-fit, but since there's relatively little space to get it out, you might destroy it in the process.
I had to split the file in half in the slicer since my print bed is not large enough; however, you only need to do this if your print bed is smaller than 266mm in its largest dimension.