Core One ++ A very Simple Case Modification
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and easy way to load the filament into the printer and feed it directly into the Nextruder.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In addition to the 4 corner profiles and the handle, the following parts are required:
20–26 M3x12 screws (18 for the walls, 2 for the handle, and 6 for the front if needed)
26 M3 nuts (Ploystop)
12 neodymium magnets, 10x5mm, for the corners and roof (N52 recommended)
8 neodymium magnets, 6x4mm, for the front, if it is to be closed with magnets.
4 acrylic sheets, 3–4 mm thick, 336x210 mm (however, I recommend 4 mm polycarbonate sheets; they are quieter, conduct heat less efficiently, and are flame-retardant).
I printed the parts in PEGT matte black. Corners with 100% and the handle with 15% infill.
P.S.
Details on the alternative spool mounts will follow shortly.