1 / 6
Curved Hook w/ Flat Base — zdjęcie 1
1 / 6

Curved Hook w/ Flat Base

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a hook to hold a bed scraper on my printer and nothing I found fit my vision. So I made it myself.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple curved hook with a flat base i made to hold my bed scraper on the side of my printer.

The base is 51mm X 31.5mm I designed it to fit some Moey double sided tape I got off Amazon

The hook is 7.75mm wide and 4.75mm tall. Its overall length from the top of the base to the tip is 46.5mm

I sliced it in half with Orca before printing because I couldn't get my support settings correct and kept wasting filament. But I'm guessing that's more my fault being a noob than the model's fault but I could be wrong. 

Thanks for checking out my model and happy printing!

*For optimal strength printing as one piece you should print on its side so the hook is parallel with your build plate*

Tagi