Sony PXW-FS5 Microphone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Microphone mount for the Sony PXW-FS5 camera, based on the original mount from Sony.
Materials required for assembly:
2 M2.5x8 screws (the original M2.5x5 screws are too short)
Some kind of dampening material for the base of the mount (I used a piece of thin sponge) and for the ID of the holder (you can reuse the rubber that's on the original mount, it peels off really easy and the adhesive can be reused)
Two pieces of filament for the hinge pins
Printing instructions:
Layer height can be whatever you want, I used 0.12mm
Make sure to increase infill to at least 50% and wall loops/perimeters to 5 for a durable print
Printed on PETG, other stronger filaments could be better.