1 / 3
Schneider Rhodos Twist 3x3m wind upgrade — zdjęcie 1
1 / 3

Schneider Rhodos Twist 3x3m wind upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

add cords to your umbrella to make it more resistant against wind

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to adapt the wind upgrade kit by Elektroarzt to fit my 3x3m Schneider Rhodos Twist umbrella.
The pole and arms are much stronger so I ended up designing the parts from scratch. As I copied the idea I still post it as a remix.

The pole part comes in two version. I recommend version A. It is a very tight fit. Depending on your printer you may need to scale it up by 1-2%. The arm parts are easy to attach.

As this umbrella can be twisted the ropes needed to be adjustable. I used these:

It fits 3mm nylon rope.