Unnecessary Working Gears Light Switch Cover/Actuator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This absolutely over-complicated, and no doubt under-appreciated working gear Light Switch cover unnecessarily works.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to try my hand ay gear designing and this unfortunate apparatus is the result. STLGears.com was an excellent source for all kinds of custom gear options as well as GearDXF.com for helping me work it all out.
There's a 2:1 reduction from the Crank drive gear to the output gear below the switch, so one full crank will turn the light on, then one full crank off. Repeat as rave requires.
I had to print the base in two halves due to my printer size. The rest just kind of pops together.
Never fumble for the light switch at 3 in the morning again, instead fumble for the crank. Upon illumination, you will ask yourself was any of this necessary. No.