Nikon Nikkor pre-AI 55 f3.5 aperture ring conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and fast solution for 55/f3.5 nikkor lens ver 3
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Checkout for ver 3, reduced design not just replicate internal structure of original aperture ring, replicate Nikon grooves as it is also (if you want to), less support (but still important to use on internal surfaces not visible anyway), bit faster print (eSun ABS+ on Voron 2.4R2 = 27 minutes).
Old but rather nice lens not fitted on "modern" F-mount nikon cameras. Basically all you neen: read some internet ("pre-ai conversion" etc), remove aperture ring, made some clean dremel job, which possibly make AI (automatic indexing, btw, not what you thinking) Indexing Tab working again without camera destruction ;)
I made my life easy - just print, replace and shoot. All you need only screwdriver (ph00?) and 1 or 2 prints for perfect feet. I don't add indexing grooves as friction is enough for aperture steady hold. Pay attention for aperture pin groove to be sure it seats deep inside.
PETG, 102% scale (find you own scale), old ender, ~1 hour with nice grip, ~20 minutes without, use support (Normal/Auto + Snug), fire lighter to remove any particles.