X-Sense SMS0A PIR wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
30 degree wedge wall mount for X-Sense SMS0A PIR motion sensor
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The X-Sense SMS0A PIR motion sensors are designed to be mounted at head height and don't come with any mount or option to enable them to be mounted higher up on the wall and angled down.
So this model is a very simple wedge mount that angles the sensor down by 30 degrees, allowing you to place the sensor much higher up on the wall, nearer the ceiling. Use the adhesive strip that came with the sensor to stick it onto the mount, and then I just used a 3M removable strip to stick the whole thing onto the wall.
Note that this model doesn't allow for corner mounting yet - I will upload that model here shortly too.