CORE One+ Door Wedge/Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door Wedge for CORE One printer to improve cooling for low temperature material and high environment temperatures.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 169
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Little CORE One+ Door Wedge, to help with cooling for low temperature material in high temperature environment.
It holds the door open a bit, without fully opening the door and possibly obstructing your room.
You can move it left and right to increase or decrease door opening.
Printing
Preferred to print with flexible material like TPU, so everything is smooth. But also possible to print in PLA.
Use file with "clamp" for flexible material, for increased slip resistance.
Use file with "NoClamp" for hard material like PLA or PETG, to prevent scratches on the door.
No Support needed.
TPU is best with 15% Gyroid infill.