Verschlussbox STGW 57 / SIG 510 Bolt Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy 3D printable box to house the bolt of a SIG 510 combat rifle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A sturdy 3D printable box to house the bolt of a SIG 510 combat rifle.
The model can be printed without supports.
The model can be printed either with a removable insert (stgw_57_verschlussbox-Case.stl and stgw_57_verschlussbox-Insert_Base.stl) or with the insert integrated into the case (stgw_57_verschlussbox-Case_with_insert).
If you have TPU available you can also print a gasket for the box, but this is in not a required component.
In addition to the 3D printed parts you will need 6xM3 screws. M3x25 screws will fit the spacing of the tabs perfectly. Alternatively you can use M3x40 screws with a smooth shaft and cut them down to 25mm with a metal saw. This way the rotating components will ride onto a smooth shaft, potential making everything feel a bit smoother. That's what I did (see pictures). Either way I would recommend adding instant glue to threads that screw into the plastic to make things stay in place better.
To make the inlaid text i used Orcaslicer's Text Modifier (right click on object, add modifier, text, than assign a different material to the modifier). Same thing can be done with Prusa Slicer.