Mycelium Speaker Components and Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was part of a Design project I did for a class. The mycelium I used was hemp-based, and bought from Ecovative…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This was part of a Design project I did for a class. The mycelium I used was hemp-based, and bought from Ecovative Design.
IMPORTANT NOTE: The mold can held together using threaded 6-32 rods and bolts. The rods are fed through the 4 holes found on the corner edges. If you do not wish to have these holes in your mycelium grow, I would recommend using hot glue to hold the molds in place.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
38
Filament: PolyMaker PLA
Category: Music