Camper Furniture BSB3030 parts /fittings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts / furniture fittings for complete camper furniture made from BSB30 extrusion profiles.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts / furniture fittings for complete camper furniture made from BSB30 extrusion profiles. For more additional parts see my other models. Use with 30x30mm (8mm slot) extrusion profiles (BSB3030 or similar), Paneling is meant to be 9mm (light) plywood with some laminate or other covering.
For most of the mounts 2 will be needed to complete
BSB30-PANEL-CORNER: 90deg corner with screw holes for panel mount (mount during frame build)
BSB30-PANEL-MOUNT: straight panel mount (can be slide in after build)
BSB30-PANEL-SUPPORT 1SIDE, soft rubber/filt anti rattle holder (single sided, can be slide in after build)
BSB30-PANEL-SUPPORT: same as above but needs to be placed during frame build
BSB30-PANEL-STICKIN: mount for stick/slide in panels that can be taken out
BSB30-MAGNET HOLDER BK/FR: magnet holder front and back (can be slide in after build)
BSB30-MAGNET HOLDER PANEL; panel part for magnet holder (total of 3 magnets per side)
BSB20-TNUT_2M; universal T-Slot nut, to be used with self tapping screws
BSB30_SCHFL; shelf holder
More to come!
Also see my furniture locks models:
Please let me know if you have any comments or suggestions and consider a small donation if you like and use this design.