Parametric Razor and Brush Holder – Snap-Lock Razor & Brush Holder (Boat & RV friendly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric razor & brush wall holder with a secure snap fit. Designed for life on a Boat or RV, but great for home too.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I built a similar version of this holder when I was living on a sailboat. It provides a rock-solid, compliant snap-retention for your razor and brush so they won't fall out when things get bumped or the boat moves around. It's motion-proof for Boats and RVs, but works well as a secure wall mount for your home bathroom, too!
Since the original layout was tailored specifically to my exact gear, I rebuilt this into a fully customizable, parametric model in Fusion 360 so anyone can adjust it to fit their setup.
Since this was very specific to my shaver and brush, I rebuilt this into a customizable, parametric model in Fusion 360 so anyone can adjust it to fit their setup.
Recommend printing in PETG.
.stl available if you happen to have a 30mm brush and an 8.5mm shaver.
Fusion 360 Parameters
**You have the option of turning ON/OFF a cutout for velcro/adhesive to flush mount the holder. The cutout is 2mm deep. Works well with small 3m velcro strips but you can also set the width to accommodate whatever you use. Supports recommended if you turn the cutout on.
Variable Name | Default Value | Instructions |
|---|---|---|
BrushDiam | 30 mm | Brush diameter (at its narrowest) where you want it to hang. |
Shaver_Diameter | 8.5 mm | Shave diameter (at its narrowest) you want it to hang. |
MountingCutoutSwitch | ON | Type only "ON" or "OFF" This Enables the cutout on the back to hide your mounting adhesive/velcro. |
Mount_Width | 19 mm | Only applies if you have MountingCutout "ON". You can adjust the width of your mounting adhesive/velcro. |
Please provide feedback! This is my first parametric model, and I'm happy to modify the files or parameters to make it easier for everyone to customize.
Happy Printing!