Handlebar End Protectors Compatible with Navee GT3 Pro Scooter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects the ends of the scooter handlebars from falls.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The ends of the GT3 Pro scooter handlebars are hard plastic, so can get scratched and deformed pretty easily by falls. This can happen to the right bar end in particular, given the design of the very small, left-side-mounted kickstand which makes tipping rightward likely. This model is for protective end covers and, if printed in a flexible filament like TPU, it'll cushion impacts a bit. It is designed for mounting using 1mm thick VHB tape.
The caps are deliberately short to not interfere with gripping the bars and reduce print time. So far in my testing the tape prevents rotation, but if it proves an issue I'll redesign them with some features to lock into the handlebar end signal light recesses (I'd hoped to keep the lights as unobstructed as possible).
A STEP version is included to facilitate customization.