INDX Filament Sensor 2020 Extrusion Mount

Want to mount your INDX Filament Sensor to something that isn't the printer? This can help ... as long as that thing is 2020 aluminium extrusion! What that extrusion is attached to is up to you (and the length of the cable).

Multiple angles have been provided because not everyone has the same needs. This should cover most angles required and if you need more than 75 degrees you can just use the 0 degree holder and turn it on the extrusion.

• 0 degrees

• 15 degrees

• 25 degrees

• 35 degrees

• 45 degrees

• 55 degrees

• 65 degrees

• 75 degrees

This model is part of a larger project aimed at changing the orientation of the provided INDX Filament Sensors. This model used to designed & test is the Prusa supplied STL file CORE_One_INDX_filament_sensor_holder_r1.stl

You will also need:

• 2020 extrusion

• Compatible T-slot nut

• Socket Cap Bolt for T-slot nut & washer

• Possible M3 x Unknown Socket Cap Bolt (if the provided Prusa one is too short)

Examples shown in photograph are the 45 degree model using M4x6 socket cap bolt & a T-slot nut sourced from an old Ender 3. The orange part shown in photos is a printed test piece from the Prusa model.

Are your numbers now going to be upside down? Use my other model here to turn the text back the right way around!