GPGF-GLB GridLatchBox - Dremel 8150 Gridfinity Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity-compliant latching box to hold a Dremel 8150 + assorted bits!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why I made this:
I got a Dremel 8150 and wanted a good way to store it + bits in a drawer
Neat if the organizer was Gridfinity-compliant
Why this is cool:
This is part of the GPGF-GLB GridLatchBox collection
It's an implementation of a soon-to-be-released bit of Featurescript for Onshape that lets you generate a Gridfinity-compliant latching box
You can keep your Dremel + bits all together
Putting it together:
You will need 6x M3 x 30 mm screws. I used socket head screw because that's what I have on hand, but you can use button heads. Or even headless screws! These are used for the hinges as well as the snap latches.
You will need a handful of M3 x 14 mm thread forming flat head screws to attach the insert holder to the box. You could probably just send it with some machine screws, but I keep thread forming screws on hand.
Print the parts!
I recommend printing the latches in PETG or something besides PLA, but PLA is probably fine too.
Attach the inserts to the bottom of the box by using the M3 thread-forming screws from the bottom.
Additional notes:
I used Tooltrace to make the original contour of the Dremel itself.
Not marking the model as AI-generated since the AI bit of things was literally just for tracing the initial outline.
Hope you enjoy!
Changelog:
Replaced the left bits organizer with -02 to fix an error with the pocket depths. Removed the prior model since it's not good.
Replaced the .3mf with one that includes this updated 3D (also _02)