Snaphook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean, modern wall hook with a hidden mount. Twist to lock, swap, and customize with future attachments
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SnapHook is a clean, modern, interchangeable wall hook system designed for everyday use. The hidden mounting base installs with two screws, then the hook simply twists into place until it locks. When you're ready for a different attachment, just twist it off and swap it out.
This is the first attachment in the SnapHook system, with more interchangeable designs coming soon.
Print Settings
Material: PLA
Layer Height: 0.20 mm
Infill: 20%+ recommended
Supports: Hook only (base prints without supports)
Installation
Mount the base using two screws. Use drywall anchors if you're not mounting into a stud. The hook has been tested to hold up to 10 lbs.
If you print one, I'd love to see your make and hear your feedback!