Foldable smartphone stand (1slot)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a smartphone stand that can be folded and made smaller.
- Ocena
- 4,778 / 5
- Polubienia
- 54
- Pobrania
- 377
- Wydruki
- 13
- Wyświetlenia
- 1840
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just one of the structural ideas for a smartphone stand.
[hinge gap]
There are three types of hinge gap widths as files. It is recommended to print "hinge_gap_test.stl" first to determine which gap is appropriate.
smartphone_stand_gap02.stl ... gap width = 0.2mm
smartphone_stand_gap03.stl ... gap width = 0.3mm
smartphone_stand_gap04.stl ... gap width = 0.4mm
[size when folded]
height:35mm, thickness:9mm, length:68.5mm
[print conditions]
-printing type: FDM
-printer: Original Prusa i3 MKS
-filament: PLA
-support: no
-brim: no
-raft: doesn't matter
-print directions: Please refer to the photo