1 / 1
8 models: Card symbols, Star, Heart infinity, Spike and Lightning — zdjęcie 1

8 models: Card symbols, Star, Heart infinity, Spike and Lightning

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

fun models for the summer

Ocena
0 / 5
Polubienia
26
Pobrania
56
Wydruki
0
Wyświetlenia
187
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Printing instructions:

  • Heart and Diamond charm:

    • Red PLA, 0,2mm layer height, no support, print charm with the heart/diamond symbol down on the printbed and the clog facing upwards, 0.4 nozzle.

  • Clubs and Spades charm:

    • Black PLA, 0,2mm layer height, no support, print charm with the club/spade symbol down on the printbed and the clog facing upwards, 0.4 nozzle.

  • Star charm:

    • Yellow PLA, 0,2mm layer height, no support, print charm with the star symbol down on the printbed and the clog facing upwards, 0.4 nozzle.

  • Heart infinity charm:

    • PLA, 0,2mm layer height, needs support, print charm with the clog on the printbed, 0.4 nozzle.

  • Spike charm:

    • PLA, 0,2mm layer height, needs support, print charm with the clog on the printbed, 0.4 nozzle.

    • or TPU, 0,2mm layer height, needs support, print charm with the clog on the printbed, 0.4 nozzle.

  • Lightning charm

    • PLA, 0,2mm layer height, needs support, print charm with the clog on the printbed, 0.4 nozzle.

Tagi