Flick 'em Up! Extra Move Disc and Extra Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I thought it was weird that there's 4 bullet disc, but only 1 move disc. So I drafted this up to give one to the other…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I thought it was weird that there's 4 bullet disc, but only 1 move disc. So I drafted this up to give one to the other team.
I printed at 5% and 10% infill and couldn't really tell the difference between the two. Otherwise, I don't have a scale the weighs grams in decimals, so could only get close, just know that the original disc is between 1 and 2 grams.
Either way, need to sand down the 3D prints as they have too much friction compared to the original disc. The goal is to make them very close in weight and friction so it doesn't matter what you use. Or just print 2 and use those instead.
Bonus, also included an extra building foot if you need it for some reason (I made a near replica when I made the Blacksmith Expansions feet).
Category: 3D Printing