Steam Controller CoverStiX case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalistic cover that protects your analog sticks.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A minimalistic cover that protects your analog sticks. It goes over the track pads and snaps in place. It has holes for the LED status light and USB-C port. See below for usage.
Works well for my use case of tossing the controller into my backpack. Use at your own risk! I take no responsibility for damages incurred by this print.
Print Settings
Supports: Yes
Resolution: .2 mm standard
Infill: 15%
Filament material: PLA
Filament brand: Overture
Filament color: Silver
Notes: Print on its side. There's two models, see picture comparison above:
Fitted model with wings that cover track pads. Enable supports
Easy print, flat edged model. No supports needed
How To Use
See Gif in slideshow above.