Intex Pool Hose Support & Bracket (for Plunger Valve 10747 & Inlets 11236 / 12354)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support bracket for Intex 26004 kit (11236, 12354). Prevents pool wall sagging from heavy water-filled 38mm hoses.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a sturdy support bracket designed to prevent the pool wall and connector from sagging under the heavy weight of a 38mm (1.5") water-filled hose.
It perfectly fits the Intex pool connection elements, providing essential strain relief to protect your pool liner from tearing and deformation.
Features:
Compatibility: Designed for Intex 12354 (Inlet Threaded Connector), 11236 (Strainer Connector), and Intex 10747 Plunger Valve.
Set Matching: Fits all components included in the popular Intex 26004 connection kit.
Secure Mounting: Secured tightly using standard plastic zip ties (cable ties).
Heavy-Duty Design: Specifically engineered to handle the load of a fully primed 38mm hose.
Print Settings:
Material: PETG or ASA/ABS (highly recommended for outdoor use and UV resistance).
Layer Height: 0.2 mm.
Wall Loops / Perimeters: 3-4 lines.
Top / Bottom Layers: 4-5 layers.
Infill: 20% (Grid or Gyroid for structural strength).
Supports: May require supports depending on printing orientation.