Baseboard Vent Adapter AC Infinity AirTap T4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Baseboard vent adapter for AC Infinity AIRTAP T4 4"x12" register booster
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Open Community License v1.1
This model was designed to accommodate an existing baseboard register opening measuring 18 inches in length. It is specifically engineered to fit the AC Infinity Airtap T4 4" × 12" register booster fan, with mounting holes positioned to align with the unit's. The holes are unthreaded; however, the tolerances are sufficient to allow screws to self-thread without compromising the model.
The model was printed in ASA filament, though virtually any filament material should be suitable depending on the level of stress the register is expected to endure in its intended application.
Cable management is being looked into for a future revision.