Samsung Galaxy Fit 3 Horizontal Charing Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert your charge cable to a cradle/horizontal stand for your Samsung Galaxy Fit 3.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Everyone seem to prefer vertical stands, but I like it better laying down like my other watch.
USB-C connector goes easily straight through the model, and the charge head fits tightly in place. To remove it, you need to use something to push it out from the other side, through the cable passthrough. For example, the long end of a 3mm hex key works well for this, but be aware you'll put scrape marks on the charge head. Maybe use something plastic instead, or try putting protective tape on the end of the key. But hey, I'm not here to tell you what to do - you'll figure something out!
The model has an internal hole for five 30mm washers so that it gets some weight. The cavity is cylindrical and 6.2mm in height. Just add a pause in your slicer to insert washers mid print.
I've included a model without the internal hole if you just want to print. Increase bottom solid layers for added stability.
No supports needed.
Photographed model is printed with a black HT-PLA Pro Matte from add:north, variable layer height for details, 20 solid bottom layers and the added washers for as much weight as possible.