HDZero Hard Case Lid with Embedded Logo (Multi-Color / 3MF)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3mf file modified for a toolchanger/mmu with the HDZero logo embedded in the lid in the proper colors
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slicer: Created and tested using OrcaSlicer 2.3.1. (I am personally using this version because I've run into too many issues on the latest OrcaSlicer releases, but the file should open and work perfectly fine on later versions as well).
Setup: Configured for a Voron StealthChanger, but can be adapted to other multi-material/toolchanger machines if needed.
Model: This file only contains the modified lid with the embedded multi-color logo. For the latch, bottom part, TPU insert and assembly instructions, please download the original files from the original model page.
---
Disclaimer: I am not affiliated with, authorized, endorsed by, or in any way officially connected to HDZero or Divimath. This is a community-made, unofficial modification created for personal and hobbyist use. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.