Rocket League GC Trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Rocket League trophy that can be printed quite large on a standard bed and supports single or multi-color!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
This trophy is meant to be printed in pieces on a standard i3 build plate (250x220x210). It pieces together and is designed to be easy to glue together. There is a nameplate where you can add text. Before I had an MMU, I just did a layer based color change for the nameplate. Now I have an MMU3, so I also have a version with multi-color support using multiple parts. The tolerance of the model is 0.15mm although I was still learning how to use parameters when I designed this, so it may not be perfect.
If you have a decently tuned printer this should be easy to print. The only important thing is to use supports on the Rocket League logo. Every other piece should be fine without any supports! Make sure to add text to the nameplate! The text should be on the wider side of the nameplate (facing down in the multi-material .3mf)
This model is inspired by a trophy I found ~3 years ago on Thingiverse, but it is modeled from scratch. I looked for it and could not find it anymore. I modeled this around the same time I found that model, so I have no memory of where to find it.