1 / 2
Hand grip for Fiskars branch saw of tree pruner UPX86
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To use the branch saw of my Fiskars tree pruner UPX86 as a handsaw, I have designed a hand grip.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
The hand grip is printed with ASA and is smoothed with aceton by spraying. I have used spraying to finish only outer surface of the hand grip, because warping is lower if only partial surfaces are smoothed.
The hand grip works also fine without smoothing and PETG.
Tips for printing:
- use gyroid for infill to avoid warping
- print each half of hand grip separate to avoid long printing time and trouble with adhesion to print bed
Assembly instruction:
- to mount the hand grip use cylinder screws M3x10 (6x) and hexagon nuts M3 (6x)