Basic S-hook v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 2 of basic S-hook. Made clip tighter, but springier.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 237
- Wydruki
- 6
- Wyświetlenia
- 675
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Version 2 of my basic S-hook. Made clip tighter, but springier.
Printed on PET-G, not tested on PLA, might work as well
There's versions with different gap size, all of them should snap easily on bar atleast 2-3 times the size of the gap. (3mm snaps easily on 7-8mm)
Set perimeter count high enough, so there's no infill of solid layers. (4 perimeters is good for 0.4n)
You can make it handle more waight by scaling it thicker (on Z-axis). This might make it stiffer when inserting too. Test weight handling before hanging anything valuable or fragile
When printing multiple hooks, print one at a time (Advanced settings: Print settings > Output > Complete individual objects) for less stringing and better durability.