1 / 3
BC250 by Gadget + 120MM VRM Heatsink + Center Mount Fain — zdjęcie 1
1 / 3

BC250 by Gadget + 120MM VRM Heatsink + Center Mount Fain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

made for single 120mm fan setup in center, 120x120x25mm heatsink w/fan on the other side.

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
431
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

I had to cut off the backplate and add more screwholes because my build area is only 200mm tall.  the models back half is 203mm tall.  I am printing this right now, i will have the build done and be able to talk about any issues I have.  I also changed the vent design, because I was getting errors in the slicer trying to print the model pictured.