Espresso Cup Shaping Set (Cylinder Mold + Base and Strip Cutters)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rolled clay shaping set: a strip cutter, a base cutter, and a cylinder mold for shaping small espresso cups by hand.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A three-part set for hand-building small espresso cups from rolled clay.
How it works:
Roll a sheet of clay to approximately 7 mm thickness.
Use the strip cutter to cut the rectangular strip that forms the side of the cup.
Use the base cutter to cut the circular base.
Wrap the strip around the cylinder mold to shape it into a cylinder.
Score and slip the seam, then attach the base to the strip while it is still on the cylinder mold.
Remove the cup from the cylinder mold right away, before the clay starts to dry. Letting it dry on the mold can cause cracking as the clay shrinks.
Tip: wrap the cylinder mold in a thin plastic film before forming the strip around it. This makes the cup much easier to release and helps prevent the clay from sticking or tearing.
Finished capacity is approximately 70–80 ml depending on clay type and shrinkage.
Designed and tested by MitsuMira in Barcelona.
Print settings:
Material: PLA
Layer height: 0.2
Infill: 10% Gyroid
Supports: Yes