U.S. General Reducer Plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed around the 5 drawer U.S. General Tool Cart to reduce the large holes for smaller tools.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I found the holes in the 5 drawer U.S. General Tool Cart too large so I made reducing plugs to make the opening smaller. I also included blanks for plugging the hole if needed. I can't verify the other U.S. General cabinets with screwdriver holes but I suspect it's the same size.
The holes in the cabinet are 12, 20 and 25mm. The reducer holes range from 5mm to 16mm. I've made them a tight fit so they don't loosen over time.
Please leave a comment if it fits on other U.S. General toolboxes so others will know.