Improved Anti-Warp Tabs for Flat Prints with Warp-Prone Filaments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These help ABS and ASA parts stick to the bed better than with just a traditional brim.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Improved Anti-Warp Tabs
Add these tabs to the sides and/or corners of your 3D prints to help avoid warping. These work better than mouse ears or a traditional brim to hold the edges of your print to the build plate.
To use these tabs, right click on your part in the slicer, go to "Add part", and click "Load...".
Load one of the shapes and add as many as you need.
Move to the edge or corner of your part and make sure it is touching the edge, including making it past any chamfer on the bottom.
INCORRECT CORRECT
Add a brim if you want extra grip and slice the part for printing!
When you're done, simply break the tabs off, or use flush cutters to remove.
Hope these help you keep your prints stuck!