Adapter to mount 20 mm shaft in the banjo of a MidiPro lathe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleeve adapter to mount a 20 mm shaft in the banjo of a MidiPro woodturning lathe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A sleeve adapter for the banjo of the MidiPro woodturning lathe. It lets you firmly mount a 20 mm diameter shaft in the 25.4 mm bore of the banjo.
It is intended for simple accessories like a sanding table, drill guide, or at max a small toolrest for detail work.
It is specific for the banjo of the MidiPro because of the size of the 'hook' and the position of the screw.
20 mm axles are used a.o. for wheels of carts and wheelbarrows. I found suitable pieces of thick-walled 20 mm tube axle in my your local hardware store: https://www.hornbach.nl/p/tarrox-as-toebehoren-set-voor-kruiwagenwielen-naaf-88-100-mm-20-naar-10-mm/6058564/ .