Moomintroll Stylized Figurine – Moomins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A highly detailed, adorable chibi-style 3D printable figurine of Moomintroll holding a seashell.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 286
- Wydruki
- 3
- Wyświetlenia
- 596
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Bring a piece of classic Nordic charm to your desk, bookshelf, or gaming room! This model features Moomintroll, the lovable and adventurous main character from the beloved Moomin stories, sculpted in a beautiful, stylized chibi aesthetic.
In this pose, Moomintroll stands curiously holding a detailed seashell in his left hand, capturing his gentle and inquisitive nature. The model features clean geometric lines blended seamlessly with classic, rounded character proportions.
Like the rest of this stylized collection, this figurine is specifically optimized to look spectacular when printed using specialty filaments like Matte PLA, Marble PLA, or Sandstone/Stone-textured PLA. When printed in these materials, the model takes on a premium, hand-carved stone statue finish that requires absolutely no painting or post-processing to look like a high-end display piece.
Recommended Print Settings
Material: Matte Gray, Marble, or Stone-textured PLA for the ideal stone-carved look.
Layer Height: 0.12mm – 0.16mm (Lower layer heights will keep the curves of the snout, ears, and seashell exceptionally smooth).
Infill: 10% – 15% (Gyroid or Grid pattern is recommended).
Supports: Minimal supports are recommended under the hands, chin, and snout area depending on your printer's bridging capabilities. Organic or tree supports work beautifully and snap off cleanly.
Post-Processing: Clean up any support material gently. If using a textured filament, no sanding or painting is required!