INNOVV RC6 - ThirdEye LED indicator handlebar clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed clamp that mounts INNOVV RC6 / ThirdEye mirror LED indicator to 1 Inch motorcycle handlebar
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Mount for Innov RC6/ThirdEye Blindspot LED indicators (https://innovv.com/products/rc6-with-dashcam-thirdeye?_pos=1&_sid=d4bb9e6b8&_ss=r) - didn't want to put on my mirrors, so mounted to handle bar (Indian Scout 101).
A slit allows you to pass the wire - mount as shown in the picture.
Printed in ASA. You can print the liner in TPU or use rubber grip tape.
Bill of Materials
Item | Qty | Spec |
|---|---|---|
M3 brass heat-set inserts | 2 | For ~4.0 mm hole, ~5.5 mm long (e.g. standard M3×5.7 knurled) |
M3 socket-cap screws | 2 | M3 × 20 mm (under-head reach ≈ 20.5 mm to the insert). Verify it does not bottom in the blind insert before clamping; drop to 18 mm if so. |
3M heavy-duty double-sided tape | 1 pad | Cut to ~35×14 mm for the LED recess |
Filament | — | ASA for |