Jbl headphone side adjuster replacment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is 100% not the right way to do it but if your here it means you also didnt find another way
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
i finished this at 1 in the morning so ill try to give at least somewhat of instuctions
first SCALE TO 300% and print with 85% infill or more if you are using pla which i made this for
when screwing the black part over <- yes very specific] dont be afraid to push around till you can get at least 3 of the little screws in
now the hard part
with the little metal part ripped out of the plastic heat it up to as hot as you can and shove it into the bottom of the print untill you make it to the end of the ripples
you let it harden and pray
if it works put everything together sound will still be amazing just the headphones themself will have a slight downgrade
and if you leave the screw a little lose it can still swiffle
sry if im rambling im extreamly tired and have been messing with this all day feel free to remix it to make it better if you feel like it give some cred if not that ok