Concept Drone Generator — parametric quad/hexa frame (UAMKT Open Studio)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free parametric concept drone frame — mission → STL, BOM & flight-stack config. By UAM Korea Tech.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a concept multirotor frame from the free Concept Drone Generator at uamkt.com/build/generator.
Enter a mission (bird monitoring, mapping/survey, recon/security, cargo) and a payload; the generator sizes an airframe class, estimates all-up-weight and per-motor thrust for a 2:1 thrust-to-weight target, builds a reference BOM, recommends a flight stack (ArduPilot / PX4), and exports this printable frame.
Included:
- Quad, 500 mm class — general perception / monitoring builds
- Hexa, 650 mm class — heavier payload + endurance
Print: PETG or PLA+ · 0.20 mm layers · 4 walls · 40–60% infill · no supports needed for the arms.
Open build methodology: uamkt.com/build
Source & docs (GitHub): github.com/uamkt/uamkt-concept-drone-generator
Dronology e-book series (Amazon): uamkt.com/publications/books
Custom mission (sensors / autonomy / airspace): uamkt.com/contact/general
⚠ Concept / education model. Printed structural parts and propellers are experimental — use certified propellers and a validated airframe for actual flight. Not legal or safety advice.
Made by UAM Korea Tech — low-altitude airspace solutions · uamkt.com