Spacer for Hesba stroller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for strollers with Ø20 mm tubes
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This model is a replacement spacer designed for Hesba strollers with Ø20 mm tubes chassis. It's intended as an affordable, DIY-friendly alternative to a full professional repair.
This model includes a counterbored hole designed to accommodate the expanded head of a rivet once installed. I've only tested the print in PETG for its added strength and durability. Make sure to use a rivet that's compatible in both length and diameter. Don't hesitate to increase the infill percentage when printing to further improve the part's strength and durability. The rivet needs to properly fit the counterbore once expanded.
Dimensions
Length: 18 mm
Width: 20 mm
Height: 30 mm
Hole diameter: Ø3.2 mm (M3)
Counterbore diameter: Ø8 mm