Amazon Echo Show Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure for 1st and 2nd generation Amazon Echo Shows!
- Ocena
- 5 / 5
- Polubienia
- 238
- Pobrania
- 1099
- Wydruki
- 6
- Wyświetlenia
- 8717
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple enclosure for the Echo Show 5 gen 1 or 2 to dress it up a little while reducing the screen angle a little. This makes the Echo show much more usable as a bedside display.
All features remain usable, but the slider for disabling the camera is a little difficult to actuate. You're unlikely to be switching this on and off often (particularly if your Echo is no longer running Fire OS), but it's worth mentioning!
Printing Instructions
Material: PLA or PETG will work great.
Layer height: 0.2mm recommended
Supports: Not required
All other settings: Leave default!
Orientation should be obvious!
Assembly
This should be fairly self explanatory - just drop your echo into the enclosure, and press the bezel onto the front, holding your echo in place.
In the video, I laser cut a cork foot, but you can print in TPU, or use some stick on feet if you prefer!