pride croc charms v2 (parmetric) (made for full spectrum)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
pride flag charms for your crocs, now stronger :3
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
intersex flag - intersex
bi flag- bi
3 stripe- pansexual, polysexual
4 stripe- asexual, nonbinary
5 stripe- trans, aromantic-asexual(sunset), aromantic, lesbain(5-stripe), gay(man)(5-stripe)
6 stripe- pride(rainbow)
7 stripe- aromantic-asexual, lesbain, gay(man), agender, demi-girl, demi-boy
print on side in the default orientation, use a brim. Use detect small walls on everything but the charm for all flags except intersex. You can also use the printable files and just change the colors out for the ones you want to use.
There is an interlocking mechanism between the stripes to improve strength so don't use anything less then a .4 mm nozzle (unless printing intersex). If you use a .2 mm nozzle instead you don't need to use detect small walls as that's just for the interlocking mechanism.
Prints on its side so it will support full spectrum pretty well. Cad files are included for fusion 360, if you look at the parameters for the pride charm file you change the flags dimensions and stripe count