Bellavista flush button nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a threaded nut for a Bellavista toilet flush button to repair a broken original one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I accidentally broke my toilet flush button nut while cleaning the cistern. After learning some 3D modelling, I decided to make my very first home repair model, and here it is!
This model is a threaded nut for a Bellavista flush button. I don't know the exact model, but I've attached photos of mine. You can leave a make with some photos of yours to help others.
I've printed it with PETG, 0.2mm layer height. (PLA is not recommended as it may degrade with humidity).
No supports needed. Works best with +90% infill.
Thanks for downloading, and I hope this helps you! Any comments, remixes, or makes will be greatly appreciated.