1 / 2
Pirates of the Caribbean - The Black Pearl — zdjęcie 1
1 / 2

Pirates of the Caribbean - The Black Pearl

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I tried this one at about 5" tall, but couldn't get it out of the supports in one piece. Too fragile. Good luck!

Ocena
0 / 5
Polubienia
44
Pobrania
370
Wydruki
0
Wyświetlenia
979
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

⚙ RECOMMENDED 3D PRINT SETTINGS

  • Material: PLA or PLA+ recommended

  • Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints

  • Infill: 10–15% recommended for most models

  • Wall Loops: 2–3

  • Supports: Enable where necessary based on model geometry

  • Build Plate Adhesion: Brim optional for smaller contact areas

  • Print Orientation: Position the model for the best stability and minimal supports

  • Scaling: Models may be resized, but check smaller details when scaling down

⚙ Printing Tip: Every printer and filament combination is different! Adjust settings as needed for the best results.

🔓 Join the Model Magic Club!

Want even more? Check out my Club memberships:

⭐ The Collector: Unlock thousands of exclusive original 3D models, with new creations added regularly!

💡 The Creator: Get everything in The Collector, plus submit up to 3 custom original model requests each month! Bring your ideas to life with models inspired by family, pets, hobbies, history, fantasy, and more!

From fantasy and horror to sci-fi, history, collectibles, and more, there's always something new to discover!

A quick note: Custom requests must be original or authorized designs. Copyrighted characters, branded designs, and other protected intellectual property are excluded without permission.

Thanks for visiting, downloading, and supporting Model Magic. Have fun printing! 😁