Back cover for Midea Portasplit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement backcover for your Midea Portasplit, in case you want to run your own hose from the condensate pump.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 559
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is a backcover replacement for your Midea Portasplit. I made this, as I still have warranty on mine but also cannot let it pump the condensate outside. My neighbours don't like getting wet. :)
This saves you from drilling your own back cover to run a hose through or leaving the refrigerant pipes exposed.
The model is mostly true to the original and modelled after a 2026 3.5kW 12.000 BTU unit, but the outer radius has been set to 6 mm as I have no tools to measure the original. The wall thickness has been increased to 4 mm around the hose clamp at the top. The overall height is 5 mm shorter than original.
If your printer cannot print a part 390 mm long, use the split version which contains a slot mechanism, so the upper part locks the lower part in place.
Printing requires minimal supports. Only the ears with the screw holes and the slot part on the bottom half needs support.
There also is a file with an 11 mm hole on the left side, to run a hose through.