Lancer Evolution 9 Front Plate Holder NZ Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A front plate holder for the evolution 9 OE style front bumper.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A friend of mine needed a front plate holder for his Evo 9 front bumper. So I designed this mount for the New Zealand license plate. Should work for other plates that are 360mm long, but you may have to drill your own holes on the plates for mounting. This is designed to mount on the left of the front bumper, about 20mm past the slim vent holes in the center of the bumper.
Includes holes for mounting onto the bumper via 10mm bolt and nut. Has slots on the side of each license plate screw hole for 10x10x3.2mmx1mm thread pitch square nuts. They are a press fit, so ensure all debris inside the slots are cleared before you press in. Curved to fit the bumper really nicely, but I would recommend using some thin foam or rubber pad on the back of it to avoid scratching the bumper with the printed unit.
Printed in PA6-CF for maximum UV resistance and impact protection. Recommend to print in 0.18 Layer height for best surface finish.
Thanks!