Encore Direct Drive (LDO Orbiter 2.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slight Modification of the main carriage body and Print fan duct shroud to accommodate the LDO Orbiter V2.0
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Encore Orbiter V2.0 Direct Drive
I tried to keep the design within the original constraints, but it does decrease the X movement by 2mm on either side, as the Orbiter body is wider than the toolhead itself.
I'd planned around the EBB36 toolhead board.
The Print Carriage Winglets are designed to use M3 Heat Inserts, but you could use hex nuts with a longer M3 bolt through to the underside.
As a bonus, the centre bolt securing the fan shroud is no longer needed as it is now secured by the Orbiter mount bolts.
No other changes were made; slice and print as per Alex's print settings. I put a modifier cylinder in each winglet to up the wall count to 4-5 for maximum Heat Insert Grip.