Industrial Replicator - LCARS - Panel - Star Trek
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Star Trek inspired LCARS panel that turns your 3D printer into an Industrial Replicator from Utopia Planitia
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 146
- Wydruki
- 3
- Wyświetlenia
- 1147
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🖖 LCARS Industrial Replicator Panel — Utopia Planitia Fleet Yards
Make it so. Turn your 3D printer into what it always secretly was: an Industrial Replicator, straight off the drafting tables of the Utopia Planitia Fleet Yards. This 4-color LCARS panel drops a slice of the 24th century onto the front of your machine, and honestly, no printer deserves it more. It is a replicator. Now it looks the part.
Designed in authentic LCARS style — the rounded elbows, the segmented data readouts, the clean Federation typography — this panel reads "INDUSTRIAL REPLICATOR · UTOPIA PLANITIA · FLEET YARDS" with all the little status blocks, access codes, and security-clearance flair that make LCARS instantly recognizable to any Trek fan.
🎨 Colors
Printed as a 4-color model. My palette of choice is black, white, yellow, and violet, which nails that classic LCARS look. But this is your bridge to command: swap in any color scheme that fits your printer, your shelf, or your favorite era of Starfleet. The model is built for remixing your palette freely.
🖨 Print Settings & Recommendations
Nozzle: Printed and looks great on a 0.4mm nozzle. If you have a 0.2mm available, use it. The panel carries a lot of tiny LCARS micro-text, and the finer nozzle makes that small detail pop. Still totally readable and sharp on 0.4mm.
Scaling: Feel free to scale in X and Y to fit your printer, your panel space, or wherever you're mounting it.
⚠ Important — keep Z at 3mm: The colored layers are mapped to a 3mm total Z height. If you rescale, make sure the final Z stays at 3mm so the color-change layers land at the right depths. Scale the footprint however you like, just lock that height.
🚀 Uses
Purpose-built to sit proudly on the front of a 3D printer, but it's just as happy as a wall sign, shelf piece, desk plate, door plaque, or set decoration for your home command center. Wherever you put it, it says "authorized personnel only."
🖖 Live long and print
If this made your printer 40% more Federation-compliant, a like, a follow, and a posted make are the best way to support more builds like this. Beam your color combos down to the comments. Energize! ⚡